1、饲料混合机http://www.jnxiangfu.com/皮带张紧度不合适，张紧过松，不能很好传递动力而增，张紧过紧，皮带磨损快，伸长快，缩短了皮带轮的寿命或者是皮带打滑而烧损，所以应该及时调整皮带张进度适中。
Mixer improper belt tension, the tension is too loose, not a good transmission of power and increasing tension too tight, quick belt wear, elongation faster, shortening the life of the pulley or belt slippage and burning, so should adjust the belt tension is moderate progress.

2、饲料混合机组内多根皮带长度不均，造成一组几根皮带张紧不一致，皮带传递动力的力时不够，所以应该挑选长度一样的三角带。
A plurality of feed mixing unit within the length of the belt is uneven, resulting in a group of a few inconsistencies belt tensioner, belt force transmission of power is not enough, so you should choose the length of the same belt.

3、饲料混合机http://www.jnxiangfu.com/进料量过多导致“闷车” 现象，或进料截面过大使刀辊转速下降过多导致“闷车”现象。
Mixer excessive amount of feed resulting in "boring car" phenomenon, or feed-sectional Ambassador knife roller speed down too much lead to "boring car" phenomenon.