饲料搅拌机http://www.jnxiangfu.com/的搅拌装置主要由搅拌筒、搅拌筒驱动装置、装料和卸料装置、搅拌筒支承装置及供水系统等组成，工作时发动机通过取力传动轴、液压传动系统及齿轮减速器驱动搅拌筒转动。搅拌筒正转时进行搅拌或装料，反转时卸料。搅拌筒的转速和转动方向由操作人员根据车的工作状态，通过改变液压马达的斜盘角度来实现。
Feed mixer mixing device consists of mixing tube, mixing tube drives, loading and unloading equipment, mixing tube support means and water supply system, etc., when the operation of the engine through the PTO shaft, hydraulic transmission and gear reducer drive agitation drum rotation. Stirring or mixing tube is being transferred when loading, unloading time reversal. Speed and direction of rotation of the mixing tube by the operator depending on the vehicle

operating state, by changing the swash plate angle of the hydraulic motor to achieve.

大部分饲料搅拌机http://www.jnxiangfu.com/搅拌筒都采用梨形结构，是一个变截丽面不对称的双锥体，外形似梨，从中部直径最大处向两端对接着一对不等长的截头圆锥，底段锥体较短，端面封闭；上端锥体较长，端部开口，低端面上安装着中心转轴，上段锥体的外部有一条环形滚道。整个搅拌筒通过中心转轴和环形滚道倾斜卧置，固定于机架上的调心轴承和一对支承滚轮组成三点支承结构，所以能平稳地饶其轴线转动。搅拌筒的驱动力来自于液压马达对中心转轴的驱动。
Most feed mixer mixing tube are used pear-shaped structure, is a variable cut Korea face asymmetric double cone, like a pear shape, from the middle to the ends of the maximum diameter of the right and then one pair of unequal length truncated cone bottom cone segment shorter closed end; the upper cone is longer, open-ended, low surface to install a central shaft, on the outside there is a segment of the cone ring raceway. Entire mixing tube through the center of the shaft and the ring raceways inclined lying position, fixed-aligning roller bearings and a pair of support on the frame support structure consisting of three, they are able to smoothly Rao its axis. The driving force comes from the mixing tube hydraulic motor drive shaft to the center.