饲料搅拌机http://www.jnxiangfu.com/购置以后就要面临使用，所以饲料搅拌机的合理调试是饲料搅拌机好用、耐用、顺畅工作的基础。那么，饲料搅拌机如何进行调试呢？   

1、必须了解饲料搅拌机的功能、属性以及应用范围，调试用的原材料细度应该小于所要压制颗粒的直径，水分在10-16%之间，物料无杂质、无异物。
Must understand the functions, properties, and application range of feed mixer, commissioning fineness of the raw materials used to suppress the particles should be less than the diameter of between 10-16% moisture, the material no

impurities, no foreign body.

2、检查饲料搅拌机配置以及正常运转所需要的辅助设备，确保能够正常工作。合理的模具压轮研磨清洗。使用油料研磨饲料颗粒机的模具，是实现易损件效能最大化的基础保障。
Check the feed mixer configuration and auxiliary equipment required for normal operation, ensuring work properly. Reasonable mold pressure wheel abrasive cleaning. Use oil feed grain grinding machine mold, is to maximize the effectiveness of the basic guarantee of wearing parts.

3、正确调整饲料搅拌机模具压轮的工作间隙，充分利用饲料搅拌机变频器的喂料快慢调速功能，尽可能根据饲料搅拌机的运转状况实现均匀合理供料。
Correct adjustment gap feed mixer mold press wheel, speed control function fully utilize feed feed mixer speed drive, to achieve uniform and reasonable as possible depending on the operating conditions for the material feed mixer.

4、饲料搅拌机http://www.jnxiangfu.com/调试完毕要注意善后保养维护，确保机器的使用寿命最长。
Feed mixer debugging pay attention to the aftermath of maintenance to ensure the longest service life of the machine.