目前国内市场上质量较差的饲料混合机都存在哪些问题呢？济北祥富饲料机械带大家一起来了解一下。
1、工作噪声大，是由于装配及零部件加工质量差而造成。
Working noise, due to poor quality of assembly and spare parts processing caused.
2、安全保护措施差，如在说明书中未明确安全操作事项，过载保护装置、除铁装置、传动防护装置、联动联锁装置、安全警示标志等项目要求缺漏。
Poor security measures, such as the safe handling instructions are not clear, overload protection devices, in addition to iron equipment, transmission guards, interlocks interlocks, warning signs and other safety items required gaps.
3、颗粒成形率低、水中稳定性差，是由于模板的孔径比不合理，饲料熟化度不合理，颗粒密度低等原因所致。
Particles forming rate, poor stability in water is due to aperture ratio template unreasonable, irrational feed ripening degree, due to the reason of low particle density.
4、模板压辊切刀、挤压螺杆等部件的材料选择不合理，不做热处理或热处理不正确，造成这些部件的耐腐耐磨性能差，影响到设备的正常运行及颗粒饲料的外观及内在质量。一般膨化颗粒机的螺杆寿命应在1000小时以上，小型平模压模的寿命应在1100小时以上，环模压模寿命应在600小时以上。
Material pressure roller cutter templates, and other parts of the extrusion screw irrational choice, not heat-treated or heat-treated incorrectly, causing corrosion wear of these parts is poor, affecting the normal operation of the equipment and the appearance of pellet feed and internal quality . General puffed grain machine screw life should be more than 1000 hours, a small flat molding die life should be more than 1100 hours, ring molding die life should be more than 600 hours
5、技术落后制造质量差，造成颗粒机的吨料电耗项目超标，增加用户生产成本。
Technology behind the manufacture of poor quality, resulting in tons of feed grain machine excessive power consumption projects, increase user productivity costs.

饲料混合机：http://www.jnxiangfu.com/