自动喂料机专门解决养鸡厂工人劳动强度大，针对中、小型鸡场设施布局不规范研制设计的，其结构独特、新颖实用、省时省力、喂料均匀、损耗少，有效的提高了工作效率，无论其结构还是性能方面都是首创，是养鸡厂理想的换代设备。那么应该如何保养呢？
一、因为喂料机的各种机件之间都是有齿轮和链条控制连接的，所以必须使齿轮和链条保证最大的润滑度，这样才不会因为缺乏润滑而损坏机器。
Because among the various parts feeders are connected to a gear and chain control, it is necessary to make gears and chains to ensure maximum lubrication, so as not to damage the machine because of a lack of lubrication.
二、喂料机在开动的时候，上面最好不要放东西，那样的话容易导致电机承受的压力过大而烧坏电机。
Feeder at the start, when the top is best not to put things, so if the pressure likely to cause the motor to burn out the motor too large.
三、检查皮带是否完好，是否有松动。喂料机的是靠皮带来传输物料的，只有皮带正常才能充分的发挥机器的生产性能，作业量才能达到最大。
Check the belt is intact, if there is loose. Feeder is transmitted by skin to bring the material, only the belt to fully play the normal performance of the machine, in order to achieve the maximum amount of work.
四、由于饲料的生产时会产生很大的灰尘，会使得喂料机的控制箱内积累大量的灰尘，灰尘会使内部电路发生短路，损毁电器电路和其它部件，所以每隔一段时间要清理一下控制箱中的灰尘。
Because a lot of dust generated during feed production, will make the control of the feeder box accumulate a lot of dust, dust causes an internal short circuit occurs, damaged electrical circuits and other components, so every once in a while to clean up control dust box.